Advertisement
Display Pixel Test
Restore User
Thermo Fisher Scientific
the dilution ratio is applied to all concentration measurements. This screen
is only accessible if the dilution ratio option is installed.
In the Main Menu, choose Service > Dilution Ratio.
●
The Display Pixel Test is used to test the LCD display. The display pixel
test is visible only when the instrument is in service mode. For more
information on the service mode, see
In the Main Menu, choose Service > Display Pixel Test.
●
The Restore User Defaults screen is used to reset the user calibration and
configuration values to factory defaults. The restore default user is visible
Defaults
only when the instrument is in service mode. For more information on the
service mode, see
In the Main Menu, choose Service > Restore User Defaults.
●
DILUTION RATIO:
CURRENTLY:
SET TO:
MOVE CURSOR
CHANGE VALUE
RANGE
AVG
DIAGS ALARM
DISPLAY PIXEL TEST:
DURING TEST PRESS
TO EXIT,
TO
BEGIN TEST
GO BACK TO MENU
RANGE
AVG
DIAGS ALARM
"Service
Mode" earlier in the chapter.
001.0 :1
002.0 :1 ?
SAVE
"Service
Mode" earlier in the chapter.
OR
xx
TOGGLEXXXXXx
Model 48i Trace Level-Enhanced Instruction Manual
Operation
Service Menu
3-83
Advertisement
Troubleshooting
