Operation
Instrument Controls Menu
Decimal Places
3-48
Model 48i Trace Level-Enhanced Instruction Manual
ANALOG INPUT DESCRIPTOR:
CURRENTLY: IN1
RANGE
Units
The Units screen allows the user to enter the units for the selected analog
input channel. The units are displayed on the diagnostic screen and in
datalogging and streaming data. The units may be from 1 to 3 characters in
length, and defaults to V (volts).
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Input Config > Select Channel > Units.
ANALOG INPUT UNITS:
CURRENTLY: V
RANGE
The Decimal Places screen allows the user to select how many digits are
displayed to the right of the decimal, from 0 to 6, with a default of 2.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Input Config > Select Channel > Decimal Places.
DECIMAL PLACES:
CURRENTLY:
RANGE
IN1
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
AVG
DIAGS ALARM
VN1
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
AVG
DIAGS ALARM
SET TO:
CHANGE VALUE
SAVE VALUE
AVG
DIAGS ALARM
BKSP
PAGE
SAVE
BKSP
PAGE
SAVE
2
3 ?
Thermo Fisher Scientific