Table 3-6. Analog Output Zero To Full-Scale Table; Choose Signal To Output - Thermo Scientific 48i Instruction Manual

Choose Signal To Output

Thermo Fisher Scientific
In the Main Menu, choose Instrument Controls > IO Configuration >
●
Analog Output Config > Select Channel > Set Minimum or
Maximum Value.
MINIMUM OUTPUT PERCENT:
SELECTED OUTPUT:
CURRENTLY:
SET TO:

CHANGE VALUE
RANGE AVG
Table 3–6. Analog Output Zero to Full-Scale Table
Output
CO
LO CO
HI CO
Range Status
Sample/Reference Ratio
LO Sample/Reference Ratio
HI Sample/Reference Ratio
Internal Temperature
Bench Temperature
Bench Pressure
Sample Flow
Intensity
Motor Speed
Bias Supply
Scrubber Efficiency
Everything Else
The Choose Signal to Output screen displays a submenu list of the analog
output signal group choices. Group choices are Concentrations, Other
Measurements, and Analog Inputs (if the I/O expansion board option is
installed). This allows the user to select the output signal to the selected
output channel. In dual or auto range mode, "HI" or "LO" is displayed to
V1
N/A %
0000.5 % ?

SAVE
DIAGS ALARM
Zero % Value
Zero (0)
Zero (0)
Zero (0)
Recommend not to change the setting for this output
0.0
0.0
0.0
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
0 Units
Model 48i Trace Level-Enhanced Instruction Manual
Operation
Instrument Controls Menu
Full-Scale 100% Value
Range Setting
Range Setting
Range Setting
1.2
1.2
1.2
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
10 Units
3-45