Operation
Instrument Controls Menu
Streaming Data Interval
Choose Item Signal
3-34
Model 48i Trace Level-Enhanced Instruction Manual
STREAMING DATA CONFIG
>INTERVAL
ADD LABELS
PREPEND TIMESTAMP
ITEM 1
ITEM 2
ITEM 3
ITEM 4
RANGE
AVG
CHOOSE STREAM DATA:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE
AVG
The Streaming Data Interval screen is used to adjust the streaming data
interval. The following interval times are available: 1, 2, 5, 10, 20, 30, 60,
90, 120, 180, 240, and 300 seconds.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Streaming Data Interval.
STREAMING DATA INTERVAL:
CURRENTLY:
SET TO:
RANGE
AVG
The Choose Signal screen displays a submenu of the analog output signal
group choices. Group choices are Concentrations, Other Measurements,
and Analog Inputs (if the I/O expansion board is installed).
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Item 1-8.
10 SEC
NO
YES
HICO
INTT
CHT
NONE
DIAGS ALARM
DIAGS ALARM
10 SEC
20 SEC ?
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
Thermo Fisher Scientific