Communication Protocol
Streaming Data
Configuration
Thermo Fisher Scientific
INSTRUMENT ID:
CURRENTLY:
SET TO:
RANGE
AVG
The Communication Protocol screen is used to change the instrument
communication protocol for serial communications.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Communication Protocol.
COMMUNICATION PROTOCOL:
CURRENTLY:
SET TO:
RANGE
AVG
The Streaming Data Configuration menu is used to allow for configuration
of the 8 streaming data output items, streaming interval, current data
format, and current timestamp setting. The Choose Item Signal submenu
displays a list of the analog output signal group choices to choose from.
Choices are Concentrations, Other Measurements, and Analog Inputs (if
the I/O expansion board option is installed).
Note Add Labels and Prepend Timestamp are toggle items that change
between yes or o when selected.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config.
48
50 ?
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
CLINK
STREAMING ?
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
▲
Model 48i Trace Level-Enhanced Instruction Manual
Operation
Instrument Controls Menu
3-33