Advertisement
Operation
Software Overview
Software
Overview
3-4
Model 48i Trace Level-Enhanced Instruction Manual
Note Not all menu items may be assigned to soft keys. If a particular menu
or screen item cannot be assigned, the key assignment screen will not come
up upon entering right-arrow-soft key combinations. All items under the
Service menu (including the menu itself) cannot be assigned soft keys.
EDIT SOFT KEY PROMPT:
CURRENTLY:RANGE
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
RANGE
AVG
The Model 48i Trace Level-Enhanced utilizes the menu-driven software as
illustrated by the flowchart in
the top of the flowchart, is displayed each time the instrument is turned on.
This screen is displayed while the instrument is warming up and
performing self-checks. After the warm-up period, the Run screen is
automatically displayed. The Run screen is the normal operating screen. It
displays the CO concentration, depending on operating mode. From the
Run screen, the Main Menu can be displayed by pressing
Menu contains a list of submenus. Each submenu contains related
instrument settings. This chapter describes each submenu and screen in
detail. Refer to the appropriate sections for more information.
RANGE
BKSP
PAGE
SAVE
DIAGS ALARM
Figure
3–3. The Power-Up screen, shown at
▲
. The Main
Thermo Fisher Scientific
Advertisement
Troubleshooting
