Advertisement
Operation
Instrument Controls Menu
Other Measurements
Analog Inputs
3-28
Model 48i Trace Level-Enhanced Instruction Manual
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > Select Field > Concentrations.
CONCENTRATIONS:
>NONE
CO
LO CO
HI CO
RANGE STATUS
RANGE
AVG
The Other Measurements screen allows the user to select the output signal
that is tied to the selected field item. The selected item is shown by "<--"
after it. Items displayed are determined by the options installed. Note that
at this point, pressing
opposed to implemented changes. To change the selected record format
and erase record log file data, see
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > Select Field > Other Measurements.
OTHER MEASUREMENTS:
>NONE
S/R
LO S/R
HI S/R
INT TEMP
BENCH TEMP
BENCH PRES
RANGE
AVG
SAMPLE FLOW
INTENSITY
MOTOR SPEED
BIAS SUPPLY
SCRUBBER EFF
The Analog Inputs screen allows the user to select the output signal (none
or analog inputs 1-8) that is tied to the selected field item. The selected
item is shown by "<--" after it. Note that at this point, pressing
indicates that these are proposed changes as opposed to implemented
changes. To change the selected record format and erase record log file
data, see
"Commit
Content" below.
<--
DIAGS ALARM
indicates that these are proposed changes as
"Commit
Content" below.
DIAGS ALARM
Thermo Fisher Scientific
Advertisement
Troubleshooting
