Advertisement
Introduction
Specifications
1-4
Model 48i Trace Level-Enhanced Instruction Manual
Operating temperature
Power requirements
Physical dimensions
Weight
Analog outputs
Digital outputs
Digital inputs
Serial Ports
Ethernet connection
*In non-condensing environments. Standard specifications cannot be maintained for sample concentrations
over 1,000 ppm. Performance specifications based on operation with
20–30 °C (may be safely operated over the range of 5–40 °C)*
100 VAC @ 50/60 Hz
115 VAC @ 50/60 Hz
220–240 VAC @ 50/60 Hz
275 watts
16.75" (W) X 8.62" (H) X 23" (D)
Approximately 49 lbs.
6 voltage outputs; 0–100 mV, 1, 5, 10 V (User selectable), 5% of
full-scale over/under range, 12 bit resolution, user
programmable
1 power fail relay Form C, 10 digital relays Form A, user
selectable alarm output, relay logic, 100 mA @ 200 VDC
16 digital inputs, user select programmable, TTL level, pulled
high
1 RS-232 or RS-485 with two connectors, baud rate 1200–
115200, Protocols: C-Link, MODBUS, Geysitech (Bayern-
Hessen), and streaming data (all user selectable)
RJ45 connector for 10Mbs Ethernet connection, static or
dynamic TCP/IP addressing
20
–30 °C.
Thermo Fisher Scientific
Advertisement
Troubleshooting
