Advertisement
Thermo Fisher Scientific
These commands report the current selection for the digital outputs in the
format. Output no Index number variable name active state. The active
state for digital outputs is open or closed. The active state for digital inputs
is high or low.
Send:
list dout
Receive:
list dout
output index variable state
1 22 I/O BD COMM closed
2 2 LOCAL/REMOTE open
3 4 UNITS open
4 19 BIAS VOLTAGE closed
7 7 SAMPLE MODE open
8 8 GEN MODE open
list lrec
list srec
list stream
list sp
These commands report the list of current selections for long record
logging data, short record logging data, streaming data output, or the
scratch pad (sp) list. The example below shows the list for streaming data
output.
Send:
list stream
Receive:
list stream
field index variable
x x time
1 10 auxt
2 13 pres
3 14 smplfl
4 15 intensity
er xy
lr xy
sr xy
x = | 0 | 1 |
: Reply termination format (see "set format format"
command)
y = | 0 | 1 | 2 | : Output format (see "set erec/lrec/srec format format"
command)
These commands report the last long and short records stored or the
dynamic data record. In the example below, the command requests a long
record with no checksum, in ASCII format with text. For details on how to
decode the flag fields within these records, see the "flags" command.
C-Link Protocol Commands
Model 48i Trace Level-Enhanced Instruction Manual
Datalogging
B-17
Advertisement
Troubleshooting
