Table 3-7. Signal Type Group Choices - Thermo Scientific 48i Instruction Manual

Operation
Instrument Controls Menu
3-46 Model 48i Trace Level-Enhanced Instruction Manual
indicate high or low concentrations. Range Status is visible only in auto
range mode. The Concentrations screen is shown below. See
below for a list of items for each signal group choice.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Output Config > Select Channel > Choose Signal To Output.
CHOOSE SIGNAL TYPE:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG
CHOOSE SIGNAL -
SELECTED OUTPUT:
CURRENTLY: CO
SET TO: NONE

CHANGE VALUE
RANGE AVG
Table 3–7. Signal Type Group Choices
Concentrations
None
CO
(single/auto range only)
LO CO
(dual range only)
HI CO
(dual range only)
Range Status
(auto range only)
DIAGS ALARM
CONC
V1
?

SAVE
DIAGS ALARM
Other Measurements
None
Sample Reference
(single/auto range only)
LO Sample Reference
(dual range only)
HI Sample Reference
(dual range only)
Internal Temperature
Bench Temperature
Bench Pressure
Sample Flow
Intensity
Table 3–7
Analog Inputs
None
Analog Input 1
Analog Input 2
Analog Input 3
Analog Input 4
Analog Input 5
Analog Input 6
Analog Input 7
Analog Input 8
Thermo Fisher Scientific