Table B-4. Record Output Formats - Thermo Scientific 48i Instruction Manual

Thermo Fisher Scientific
Send: lrec 5
Receive: lrec 100 5
10:15 05-12-03 flags 9c040000 co 7349E+0 loco 5994E+0
intt 33.2 cht 44.7 pres 758.9 smplfl 1.085 speed 100.0
biasv -115.5 intensity 1999940
10:15 05-12-03 flags 9c040000 co 7349E+0 loco 5994E+0
intt 33.2 cht 44.7 pres 758.9 smplfl 1.085 speed 100.0
biasv -115.5 intensity 1999940
10:15 05-12-03 flags 9c040000 co 7349E+0 loco 5994E+0
intt 33.2 cht 44.7 pres 758.9 smplfl 1.085 speed 100.0
biasv -115.5 intensity 1999940
10:15 05-12-03 flags 9c040000 co 7349E+0 loco 5994E+0
intt 33.2 cht 44.7 pres 758.9 smplfl 1.085 speed 100.0
biasv -115.5 intensity 1999940
10:15 05-12-03 flags 9c040000 co 7349E+0 loco 5994E+0
intt 33.2 cht 44.7 pres 758.9 smplfl 1.085 speed 100.0
biasv -115.5 intensity 1999940
erec format
lrec format
srec format
These commands report the output format for long and short records, and
dynamic data in various formats such as ASCII without text, ASCII with
text, or binary. The example below shows the output format for long
records is ASCII with text, according to
Send: lrec format
Receive: lrec format 01
set erec format format
set lrec format format
set srec format format
These commands set the output format for long and short records, and
dynamic data, according to
record output format to ASCII with text.
Send: set lrec format 1
Receive: set lrec format 1 ok
Table B–4. Record Output Formats
Format Output Format
0 ASCII no text
1 ASCII with text
2 Binary data
Table B–4.
Table B–4. The example below sets the long
Model 48i Trace Level-Enhanced Instruction Manual
C-Link Protocol Commands
Datalogging
B-19