Display Mpls Statistics Interface - HP 5800 series Command Reference Manual

Field
Static-Lsp Type

display mpls statistics interface

Description
Use the display mpls statistics interface command to display MPLS statistics for one or all interfaces.
To display statistics on a device, set the statistics reading interval first. By default, the interval is 0, and the
system does not read collected MPLS statistics. In this case, the value of every statistic is 0.
Related commands: statistics interval.
Syntax
display mpls statistics interface { interface-type interface-number | all } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Displays MPLS statistics for the specified interface.
all: Displays MPLS statistics for all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display MPLS statistics for all interfaces.
<Sysname> display mpls statistics interface all
Statistics for Interface IN :
Incoming Interface Vlan-interface1
Octets
Packets
Errors
Disables
Failed Label Lookup
Start Time
End Time
Statistics for Interface OUT :
Outgoing Interface Vlan-interface2
Description
Type of the static LSP
: 0
: 0
: 0
: 0
: 0
: 2010/04/28 10:23:55
: 2010/04/28 10:23:55
82