Irf-Port Member-Id/Port-Number; Irf-Port Port-Number - HP 12500 series Command Reference Manual

irf-port member-id/port-number

Use irf-port member-id/port-number to enter IRF port view in IRF mode.
Use undo irf-port member-id/port-number to removing all port bindings on an IRF port in IRF
mode.
Syntax
irf-port member-id/port-number
undo irf-port member-id/port-number
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
member-id/port-number: Specifies an IRF port on an IRF member. The member-id argument
represents the ID of the IRF member. The port-number argument represents the IRF port index and
must be 1 or 2.
Usage guidelines
To set up an IRF link between two devices, you must enter IRF port view to bind physical ports to
the IRF port used by each device for IRF connection.
Before removing all port bindings on an IRF port, shut down all its physical ports.
Examples
# In IRF mode, enter the view of IRF-port 1 on member 1.
<Sysname> system-view
[Sysname] irf-port 1/1
[Sysname-irf-port1/1]
Related commands
port group interface

irf-port port-number

Use irf-port port-number to enter IRF port view in standalone mode.
Use undo irf-port port-number to remove all port bindings on an IRF port in standalone mode.
Syntax
irf-port port-number
undo irf-port port-number
Views
System view
Predefined user roles
network-admin
21