Portal Nas-Ip; Portal Nas-Port-Type - HP 3600 v2 Series Command Reference Manual

Examples
# Specify NAS ID profile aaa for VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-id-profile aaa

portal nas-ip

Syntax
portal nas-ip ip-address
undo portal nas-ip
View
VLAN interface view
Default level
2: System level
Parameters
ip-address: Specifies the source IP address to be specified for portal packets. This IP address must be a
local IP address, and cannot be 0.0.0.0, 255.255.255.255, a class D address, a class E address, or a
loopback address.
Description
Use the portal nas-ip command to configure the source IP address for the interface to use for portal
packets to be sent.
Use the undo portal nas-ip command to restore the default.
By default, no source IP address is specified, and the IP address of the user access interface is used as the
source IP address of the portal packets.
Examples
# Configure the source IP address for portal packets to be sent on VLAN-interface 5 as 2.2.2.2.
<Sysname> system-view
[Sysname] interface vlan-interface 5
[Sysname-Vlan-interface5] portal nas-ip 2.2.2.2

portal nas-port-type

Syntax
portal nas-port-type { ethernet | wireless }
undo portal nas-port-type
View
VLAN interface view
Default level
2: System level
157