Data Saved By [Initial Status Define] - Sony XVS Series User Manual

Menu number Menu path
7322.5 Engineering Setup >Panel >Xpt Assign >Main, V/K
Pair Assign
7322.6 Engineering Setup >Panel >Xpt Assign >Src Name/
Src Color
7326.2 Engineering Setup >Panel >Operation >Effect Mode
7331 Engineering Setup >Switcher >Config
7332 Engineering Setup >Switcher >Input
7333 Engineering Setup >Switcher >Output
7334 Engineering Setup >Switcher >Transition
7335 Engineering Setup >Switcher >Key/Wipe/FM/CCR
7336 Engineering Setup >Switcher >Link
7337 Engineering Setup >Switcher >Device Interface
Included in DME Setup
Menu number Menu path
7326.2 Engineering Setup >Panel >Operation >Effect Mode
7341 Engineering Setup >DME

Data Saved by [Initial Status Define]

Included in Panel
Menu number Menu path
– –
6351 Snapshot >Key Snapshot
>Attribute
Included in Switcher (same as data saved in Snapshot)
Note
In Multi Program 2 mode, M/E Config settings are saved
in Snapshot when [Recall M/E Config] is enabled, but are
not saved by [Initial Status Define].
Saved data
All data relating to Main, V/K Pair Assign menu
All data relating to Src Name/Src Color menu
Setting of [Default KF Duration] for switcher
keyframes
All data relating to Config menu
All data relating to Input menu
All data relating to Output menu
All data relating to Transition menu
All data relating to Key/Wipe/FM/CCR menu
All data relating to Link menu
All data relating to Device Interface menu
Saved data
• Settings relating to [Default KF Duration] for DME
keyframes
• Setting data for [Effect Auto Save]
All data relating to DME menu
Saved data
• Key control block delegation buttons and [AUTO DELEG] button settings
• Numeric keypad control block mode selection buttons, [TC], [RCALL], and
[STORE] button settings
• Utility/shotbox control block mode selection button settings
• Cross-point control block delegation button settings assigned to 1st row,
cross-point pad button settings ([MACRO ATTACH ENABLE], display mode
button, 1st row or 2nd row delegation buttons, [KEY], [DUAL BKGD BUS],
[ROW-1 PROT] to [ROW-4 PROT]), cross-point pad display page numbers
• AUX bus control block bus delegation button settings, cross-point pad
button settings (display mode button, [RTR MODE], [2ND DELG], [DEST
DISP MODE], [KEY], level selection buttons), cross-point pad display page
numbers
• Transition control block [KF] button settings
• Flexi Pad control block mode selection button settings, bank selection
button settings, key delegation button settings in key operation mode
<Recall Mode> group settings
475