Table of Contents
Advertisement
If auto run is set, the effects are executed at the same
time they are recalled.
When auto run is not set for the recalled register
Simply recalling the register does not execute the
effects. Press the [RUN] button in the memory recall
section to execute the effects.
Shotbox Execution (Utility/Shotbox
Control Block)
Mode selection buttons
Memory recall buttons
RUN button
Utility/shotbox control block
In the utility/shotbox control block, you can assign
shotbox registers (1 to 99) to 24 memory recall buttons on
each of banks 1 to 20.
The bank is switched using the mode selection buttons.
The [BANK1] to [BANK6] bank 1 to 6 mode selection
buttons are assigned by default.
Shotbox register and button assignments are made in the
Setup menu.
For details about assigning a shotbox register, see
"Assigning a Function to a Memory Recall Button in the
Utility/Shotbox Control Block" (page 387).
For details about mode selection button assignment, see
"Setting Utility/Shotbox Control Block Button
Assignments" (page 377).
1
Select the target bank using the mode selection
buttons.
The selected button is lit amber, and the control block
switches to function recall mode.
The functions for the selected bank are assigned to the
memory recall buttons.
The register name is displayed in white characters for
registers with a registered shotbox. The register
number is displayed in gray characters for empty
registers.
2
Press the memory recall button with the registered
register you want to execute.
The selected button lights orange, and the shotbox
register is executed.
If auto run is set, the effects are executed at the same
time they are recalled.
When auto run is not set for the recalled register
Simply recalling the register does not execute the
effects. The region selection buttons on the numeric
keypad control block corresponding to the regions for
which effects are set turn on. Press the [RUN] button
in the utility/shotbox control block to execute the
effects.
Shotbox Execution (Cross-Point
Control Block)
Assign a shotbox register to the 1st row/2nd row buttons of
the cross-point control block and then select it in utility/
shotbox mode. You can set assignments for each button on
utility/shotbox banks 1 to 10. The settings are common to
the M/E and PGM/PST banks.
For details about assigning a shotbox register, see
"Assigning Functions to 1st Row/2nd Row Buttons of the
Cross-Point Control Block" (page 389).
To execute a shotbox register, you use the same procedure
as executing a utility.
For details, see "Utility Execution (Cross-Point Control
Block)" (page 319).
When auto run is not set for the recalled register
Simply recalling the register does not execute the effects.
The region selection buttons on the numeric keypad
control block corresponding to the regions for which
effects are set turn on. Press the [RUN] button in the
utility/shotbox control block to execute the effects.
324
Advertisement
Table of Contents
