Scope Of Supply - Busch-Jaeger mini KNX 6131/20 series Technical Manual

Note
The device does not fit in the BS and VDE flush-mounted box.
Recommendation:
■
■
■
The detection range can additionally be adapted through four individual sectors with switch-off
function (through parameter settings).
Note
For the 6131/50-xxx and/or 6131/51-xxx devices, the sectors are combined into
2 sensor groups (1/2 and 3/4).
Attention
Damage to property
The device contains highly sensitive sensors and lens systems.
–
4.2

Scope of supply

The scope of supply only contains the flush-mounted device insert (see chapter 4.1). The
surface-mounted housing (article no. 6131/x9) for surface mounting and the intermediate ring
(article no. 6131/38-xxx) for mounting to a flush-mounted box must be ordered separately!
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
HaloX-O flush-mounted box from Kaiser (article no. 1290-40) with
corresponding cover (article no. 1290-47 or article no. 1290-85 for exposed
concrete)
IBTronic H120-68 from Spelsberg (article no. 97600501)
Mounting to VDE flush-mounted box using the intermediate ring (6131/38-
xxx) (with the exception of 6131/20-xxx + 6131/21-xxx)
Do not cover or tape lens segments since this will interfere with the function
of the device.
Do not clean the device and the lens system with abrasive or aggressive
cleaning agents.
Product description
│21