Setpoint Adjustment; Setpoint Adjustment - Maximum Manual Increase During Heating Mode (0 - 15°C); Setpoint Adjustment - Maximum Manual Reduction During Heating Mode (0 - 15°C); Setpoint Adjustment - Maximum Manual Increase During Cooling Mode (0 - 15°C) - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.8.84 Setpoint adjustment

Note
This parameter is only available if the "Device function" parameter is set on
either "Single device" or "Master device".
11.8.85 Setpoint adjustment — Maximum manual increase during heating mode (0 - 15°C)
Options:
This preset can be used to limit the manual increase during heating.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating," "Heating with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
11.8.86 Setpoint adjustment — Maximum manual reduction during heating mode (0 - 15°C)
Options:
This preset can be used to limit the manual decrease during heating.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating," "Heating with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
11.8.87 Setpoint adjustment — Maximum manual increase during cooling mode (0 - 15°C)
Options:
This preset can be used to limit the manual increase during cooling.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling," "Cooling with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
11.8.88 Setpoint adjustment — Maximum manual reduction during cooling mode (0 - 15°C)
Options:
This preset can be used to limit the manual decrease during cooling.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling," "Cooling with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Setting option between 0 - 15
Setting option between 0 - 15
Setting option between 0 - 15
Setting option between 0 - 15
Application "RTC object"
│148