11.6
Application "HVAC" (Heating, ventilation, air-conditioning)
11.6.1
General parameters — Output is of type
Options:
–
1 Bit: Intended for switch actuators.
–
1 Byte 0 - 100%: For activating dimmers.
–
1 Byte 0 - 255: For actuators, which are activated with a value of between 0 and 255.
–
Light scene number (1-64): For activating light scenes.
–
RTC operating mode switchover (1 Byte): To directly switch room temperature controllers
into a specific operating mode:
Auto
■
Comfort
■
Standby
■
ECO
■
Frost/heat protection
–
2-byte float: To send a specific temperature for example.
Note
If the type of output is changed, also the options for setting the parameters
change:
–
–
–
In this manual only values for setting the RTC operating mode switchover
(1-byte) are described.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Application "HVAC" (Heating, ventilation, air-conditioning)
1 bit
1 byte 0 - 100%
1 byte 0 - 255
Light scene number (1-64)
RTC operating mode switchover (1 byte)
2-byte float
Value for switch-on
Value for switch-off
Value for force-position
│109