Table of Contents
Advertisement
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Now slide the connected device into the surface
■
mounted housing according to the illustration shown
opposite. Take note of the guide rails. This is the only
way the device can be inserted!
ATTENTION (applies only for devices 6131/50-xxx
and/or 6131/51-xxx):
The arrows on the device and in the surface-mounted
■
housing must be aligned in a longitudinal direction to
the corridor. This absolutely must be taken into
consideration when the intermediate ring is
positioned.
Mounting
│50
Advertisement
Table of Contents
