Assigning A Physical Address; Assigning The Group Address(Es); Selection Of Software Application; Description Of Software Applications - Busch-Jaeger mini KNX 6131/20 series Technical Manual

7.2.2

Assigning a physical address

Note
The programming mode on the premium versions and the Busch-Watchdog Sky
KNX can also be switched on and off via remote control (red button). This mode
switches itself off automatically after 5 minutes.
7.2.3

Assigning the group address(es)

The group addresses are assigned in connection with the ETS.
7.2.4

Selection of software application

Please contact our Internet Support Unit (www.Busch-Jaeger.com). The application is loaded
into the device via the ETS.
7.2.5

Description of software applications

Various functions can be implemented via the ETS commissioning software. The function of the
device is dependent on the parameters selected in the respective software application. Detailed
description of applications with explanation of parameters; see Chapter 11 (only in the following
languages: DE, EN, ES, FR, NL, IT).
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
1. Press the programming button (A).
– The red (programming) LED goes on.
– After the physical address has been programmed, the
red (programming) LED goes off.
A
Commissioning
│56