Extended Parameter Settings (Monitoring) - Overwriting Settings During A Download - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.3.49 Extended parameter settings (monitoring) — Overwriting settings during a download
Options:
– Yes: When the application is reloaded into the detector, the values changed via the bus are
overwritten with the parameterised values of the ETS application.
– No: When the application is reloaded into the detector, the values changed via the bus are
not overwritten with the parameterised values of the ETS application.
Values:
– Switch-off delays
– External/internal brightness threshold
– Brightness correction (daylight), see "Brightness detection" application
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Yes
No
"Detector" application
│82