Table of Contents
Advertisement
2.4
Target group / Qualifications of personnel
2.4.1
Operation
No special qualifications are needed to operate the device.
2.4.2
Installation, commissioning and maintenance
Installation, commissioning and maintenance of the product must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being reconnected
3. Ensure there is no voltage
4. Earth and short circuit
5. Cover or barricade adjacent live parts
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Safety
│17
Advertisement
Table of Contents
