Brightness Parameter - Use Of Object For Detection Independent Of Brightness; Brightness Parameter - Activating Detection Independent Of Brightness With; Brightness Parameter - Detection Independent Of Brightness After Bus Voltage Recovery; Brightness Parameter - Input Slave Takes The Brightness Into Consideration - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.3.27 Brightness parameter — Use of object for detection independent of brightness
Options:
– No: There is no separate object for detection independent of brightness.
– Yes: A 1-bit communication object for "brightness-independent detection" (input) is being
enabled. This object allows the detector to be switched independent of brightness.
11.3.28 Brightness parameter — Activating detection independent of brightness with
Options:
– On telegram: Detection independent of brightness is activated with a 1 telegram and
deactivated with a 0 telegram.
– On telegram: Detection independent of brightness is activated with a 0 telegram and
deactivated with a 1 telegram.
11.3.29 Brightness parameter — Detection independent of brightness after bus voltage
recovery
Options:
– No: Detection independent of brightness is deactivated after a bus voltage recovery,
reprogramming or a reset.
– Yes: Detection independent of brightness is activated after a bus voltage recovery,
reprogramming or a reset.
11.3.30 Brightness parameter — Input Slave takes the brightness into consideration
Options:
– No: Every ON telegram to the input slave object ensures that the detector is switched on or
the switch-off delay is reset. This is independent of whether the actual brightness is below or
above the brightness-value threshold.
– Yes: The detector is switched on or the switch-off delay is reset only when the actual
brightness is below the brightness-value threshold.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
No
Yes
On telegram
Off telegram
No
Yes
No
Yes
"Detector" application
│74