11.19
Communication objects — Object RTC
11.19.1 Heating control value
Number
1
Description:
1. This object is used to operate a switching actuating drive, e.g. a thermoelectric positioner,
that is controlled by a switching/heating actuator.
2. This object is used to control an actuating drive with a continuous input value (0%..100%),
e.g. an electromotive actuating drive.
11.19.2 Additional heating stage
Number
2
Description:
1. This object is used to operate a switching actuating drive, e.g. a thermoelectric positioner,
that is controlled by a switching/heating actuator.
2. This object is used to control an actuating drive with a continuous input value (0%..100%),
e.g. an electromotive actuating drive.
Note
The additional stage can also be used as a parallel second heating stage. To do
this, set the parameter for the temperature difference to the basic stage to 0°C.
11.19.3 Cooling control value
Number
3
Description:
1. This object is used to operate a switching actuating drive, e.g. a thermoelectric positioner,
that is controlled by a switching/heating actuator.
2. This object is used to control an actuating drive with a continuous input value (0%..100%),
e.g. an electromotive actuating drive.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Name
Heating control value (control
value heating/cooling)
Name
Additional heating stage
(additional heating/cooling stage)
Name
Cooling control value
Communication objects — Object RTC
Object function
Output
Object function
Output
Object function
Output
Data type
1. Switching
2. Percent (0..100%)
Data type
1. Switching
2. Percent (0..100%)
Data type
1. Switching
2. Percent (0..100%)
│180