Application: "Ir Functions (White); Button 1 - 5 (Left/Right) / Memo Button M1/M2; Application: "Ir Functions (Blue) - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.9

Application: "IR functions (white)"

11.9.1 Button 1 – 5 (left/right) / memo button M1/M2
The premium version and the Busch-Watchdog Sky KNX have a sensor for receiving infrared
signals. This allows the IR remote control 6010-25 to be used, for example.
Two channels that can be selected on the transmitter are available for operation: the blue and
the white channel.
The following example is to serve as an aid for commissioning. The infrared functions can be
programmed in the device. For button M1 (white) the function "Switching, rocker switch left /
right" is selected. The parameter "Reaction to rising edge" is shown within this function. This
parameter is to be set on "ON". The function has the communication object "Switching". This
object must now be connected with the object "Save setpoint" of the constant light application.
This stores the current light value as setpoint as soon as button M1 is pressed. The light can,
for example, be set with the remote control. For this, one or several button pairs are occupied
with the function "Dimming rocker switch total" and connected directly with the dimming
actuator. Now use the button pair selected to set the desired brightness and save the value with
button M1.
11.10

Application: "IR functions (blue)"

11.10.1 Button 1 – 5 (left/right) / memo button M1/M2
The premium version and the Busch-Watchdog Sky KNX have a sensor for receiving infrared
signals. This allows the IR remote control 6010-25 to be used, for example.
Two channels that can be selected on the transmitter are available for operation: the blue and
the white channel.
The following example is to serve as an aid for commissioning. The infrared functions can be
programmed in the device. For button M1 (blue) the function "Switching, rocker switch left /
right" is selected. The parameter "Reaction to rising edge" is shown within this function. This
parameter is to be set on "ON". The function has the communication object "Switching". This
object must now be connected with the object "Save setpoint" of the constant light application.
This stores the current light value as setpoint as soon as button M1 is pressed. The light can,
for example, be set with the remote control. For this, one or several button pairs are occupied
with the function "Dimming rocker switch total" and connected directly with the dimming
actuator. Now use the button pair selected to set the desired brightness and save the value with
button M1.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Application: "IR functions (white)"
│162