Table of Contents
Advertisement
11.7.4
General parameters — Fade in extended parameters
Options:
–
No: Only the most important parameters for setting the detector are displayed.
–
Yes: All parameters are displayed, also those that are not required in most cases.
11.7.5
Extended parameters — Use of internal brightness
Options:
–
Yes: The internal brightness sensor is used as encoder for the different detector
applications.
–
No: The internal brightness sensor is not used. The brightness values must then be sent
from the external brightness sensors.
11.7.6
Extended parameters — Number of external brightness measurement objects
Options:
–
0: There are no separate 2-byte "external brightness 1 and 2" (input) objects to link the
external brightness sensors with the presence detector.
–
1: There is a separate "external brightness 1" (input) object with which the internal
brightness sensor is not used. The brightness values must then be sent from the external
brightness sensors.
–
2: There is a separate "external brightness 2" (input) object with which the internal
brightness sensor is not used. The brightness values must then be sent from the external
brightness sensors.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
No
Yes
Yes
No
0
1
2
"Brightness detection" application
│118
Advertisement
Table of Contents
