11.15
Communication objects — Presence detector — Constant light switch
11.15.1 P1: Output 1
Number
The parameterised value during movement is sent to the actuator via the output when the
parameterised brightness threshold including the hysteresis is exceeded or falls short. When
output 2 is active, output 1 is to activated the light row with the largest distance to the window
and output 2 with the smallest distance to the window.
11.15.2 Px: Output 2
Number
The parameterised value during movement is sent to the actuator via the output when the
parameterised brightness threshold including the hysteresis is exceeded or falls short. When
output 2 is active, output 1 is to activated the light row with the largest distance to the window
and output 2 with the smallest distance to the window.
11.15.3 Px: Automatic / manual off
Number
The control can be activated (automatic) or deactivated (manual) via the object. If the object is
connected to a control element, the device is switched off with a 0 and the control is
deactivated.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Communication objects — Presence detector — Constant light switch
Name
Object function
P1: Output 1
Name
Object function
Px: Output 2
Name
Px: Automatic / manual off
Data type
1.001 switch
5.001 percentage (0..100%)
5.010 counter pulses (0..255)
18.001 scene control
20.102 HAVC mode
9.* 2-byte float value
Data type
1.001 switch
5.001 percentage (0..100%)
5.010 counter pulses (0..255)
18.001 scene control
20.102 HAVC mode
9.* 2-byte float value
Object function
Data type
1.001 switch
│169