11.19.42 Request manual fan speed level
Number
40
This 1-bit communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
11.19.43 Request fan speed level
Number
41
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
11.19.44 Confirm fan speed level
Number
42
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
11.19.45 Controller status RHCC
Number
43
This communication object outputs the heating/cooling operating mode, active/inactive
operation, the frost and heat alarm, and the error (actual temperature reading failure) in
accordance with the specification for the RHCC (Room Heating Cooling Controller) status.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Name
1. Request manual fan speed
level (master)
2. Request manual fan speed
level (slave)
Name
1. Request fan speed level
(master)
2. Request fan speed level
(slave)
Name
1. Confirm fan speed level
(master)
2. Confirm fan speed level (slave)
Name
Controller status RHCC
Communication objects — Object RTC
Object function
Input
Input
Object function
Input
Input
Object function
Input / output
Input / output
Object function
Output
Data type
Switching
Switching
Data type
Percent (0..100%)
Percent (0..100%)
Data type
Percent (0..100%)
Percent (0..100%)
Data type
2-byte floating point
value
│193