Table of Contents
Advertisement
4
Product description
4.1
Device overview
Note
The following descriptions apply to all types of the Busch-Presence detector
KNX / Busch-Watchdog Sky KNX.
1
4
Fig. 1:
Product overview
[A] IR receiver (only premium)
[B] Programming button
[C] Sensor for brightness detection
[D] Programming LED
[1-4] Individual sectors with switch-off function (via parameter setting)
For numbering, see the rear of the device
Note
For the 6131/50-xxx and/or 6131/51-xxx devices, the 1/2 and 3/4 sensor groups
can be switched off (through parameter setting).
This device is a presence or movement detector which is designed only for interior areas of
buildings. The devices serve for switching and regulating lighting systems and/or HKL (HVAC)
systems in dependence of brightness and/or movement. It makes possible the specific
deactivation and activation of light rows in dependence of the brightness of the room. Also
dimming/regulating the brightness to a defined value in a designated detection range with the
corresponding device is possible. The premium version additionally contains a room
temperature controller object.
The integrated bus coupler makes possible the connection of a KNX bus line.
The device can be mounted either in the ceiling via hollow-wall mounting or on the ceiling via
the optionally available surface-mounted housing (article number 6131/x9). The mounting
instructions are enclosed with the surface-mounted housing. It can additionally be mounted
(with the exception of 6131/20-xxx + 6131/21-xxx) on a flush-mounted box using an optionally
available intermediate ring (6131/38-xxx). Mounting instructions are enclosed with the
intermediate ring. The overall function of the device also depends on the mounting height.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
2
3
Product description
C
B
D
A
│20
Advertisement
Table of Contents
