KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Now slide the connected device into the intermediate
■
ring according to the illustration shown opposite. Take
note of the guide rails. This is the only way the device
can be inserted!
ATTENTION (applies only for devices 6131/50-xxx
and/or 6131/51-xxx):
The arrows on the device and in the intermediate ring
■
must be aligned in a longitudinal direction to the
corridor. This absolutely must be taken into
consideration when the intermediate ring is
positioned.
Now turn the device in a clock-wise direction until it is
■
aligned with the surface-mounted housing.
Mounting
│53