On/Off Request; Setpoint Display; Request Setpoint; Confirm Setpoint - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.19.37 On/Off request

Number
35
This 1-bit communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.

11.19.38 Setpoint display

Number
36
This 2-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.

11.19.39 Request setpoint

Number
37
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.

11.19.40 Confirm setpoint

Number
38
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.

11.19.41 Heating/cooling request

Number
39
This 1-bit communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Name
1. On/off request (master)
2. On/off request (slave)
Name
1. Set value display (master)
2. Set value display (slave)
Name
1. Request setpoint (master)
2. Request setpoint (slave)
Name
1. Confirm setpoint (master)
2. Confirm setpoint (slave)
Name
1. Heating/cooling request
(master)
2. Heating/cooling request (slave)
Communication objects — Object RTC
Object function
Input
Input
Object function
Input / output
Input / output
Object function
Input
Input
Object function
Input / output
Input / output
Object function
Input
Input
Data type
Switching
Switching
Data type
2-byte floating point
value
2-byte floating point
value
Data type
Percent (0..100%)
Percent (0..100%)
Data type
Percent (0..100%)
Percent (0..100%)
Data type
Switching
Switching
│192