Fault, Actual Temperature; Local Actual Temperature; Current Setpoint - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.19.9 Fault, actual temperature

Number
9
If one of the parameterised input temperatures is unavailable to the controller for a period longer
than the monitoring time, the controller enters the error mode. The error mode is sent to the bus
as the value 1.
Note
About item 2:
This object must be connected to the "Fault, actual temperature (slave)" object
in order to indicate the error mode.
About item 3:
This object must be connected to the "Fault, actual temperature (slave)" object
in order to indicate the error mode.

11.19.10 Local actual temperature

Number
10
Not visible!

11.19.11 Current setpoint

Number
11
The object outputs the current setpoint temperature resulting from the following: the
parameterised setpoint temperature of the current operation type and operating mode, the
manual setpoint temperature adjustment, a change in the base setpoint temperature via the
base setpoint value object. This is purely a transmitting object.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Name
1. Fault, actual temperature
2. Fault, actual temperature
(master)
3. Fault, actual temperature
(slave)
Name
Local actual temperature
Name
Current setpoint
Communication objects — Object RTC
Object function
Output
Output
Output
Object function
Output
Object function
Output
Data type
Switching
Switching
Switching
Data type
Switching
Data type
2-byte floating point
value
│183