P3: Switch-On Delay; P3: Force-Position - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.17.5 P3: Switch-on delay

Number
41
The switch-on delay can be reprogrammed at all times via this object from a different control
element without the aid of ETS. If this value is not to be overwritten during each download, the
parameter "Overwrite setting during download" is to be programmed accordingly.

11.17.6 P3: Force-position

Number
42
By means of function force-position the control function is deactivated (value = 1) and the
device switches to a parameterised value until the force-position is deactivated again (value =
0). The force-position has a lower priority than enable.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Communication objects — Presence detector — HVAC
Name
P3: Switch-on delay
Name
P3: Force-position
Object function
Input
Object function
Input
Data type
7.005 time (s)
Data type
1.001 switch
│177