Communication Objects - Presence Detector - Hvac; P3: Hvac; P3: Slave; P3: Enable Hvac - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.17 Communication objects — Presence detector — HVAC

11.17.1 P3: HVAC

Number
37
The value for switching on is sent to the actuator via the output during movement and after
expiry of the switch-on delay.
The value for switch-off is sent to the actuator after expiry of the switch-off delay.

11.17.2 P3: Slave

Number
37
The constant light controller can be switched on with a 1 from a different movement or presence
detector via the object.

11.17.3 P3: Enable HVAC

Number
39
The detector can be blocked or enabled via the object. Enabling has priority over all other
objects.

11.17.4 P3: Light-on time

Number
40
If no movement is detected, the function enters the programmed switch-off and then switches
off. The switch-off delay can be reprogrammed at all times via this object from a different control
element without the aid of ETS. If this value is not to be overwritten during each download, the
parameter "Overwrite setting during download" is to be programmed accordingly.
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Communication objects — Presence detector — HVAC
Name
P3: HVAC
Name
P3: Slave
Name
P3: Enable HVAC
Name
P3: Light-on time
Object function Data type
Output 1.001 switch
5.001 percentage (0..100%)
5.010 counter pulses (0..255)
18.001 scene control
20.102 HAVC mode
9.* 2-byte float value
Object function
Input
Object function
Input
Object function
Input
Data type
1.001 switch
Data type
1.001 switch
Data type
7.005 time (s)
│176