Table of Contents
Advertisement
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
■
Ø 68 mm
ATTENTION (applies only for devices 6131/50-xxx
and/or 6131/51-xxx):
■
■
■
Carefully slide the connected device into the recess.
The clamps must be pressed toward the top.
The arrows on the device must be aligned in a
longitudinal direction to the corridor.
After the insertion, the clamps fold down
automatically and hold the device in the correct
position.
A subsequent alignment is still possible!
Mounting
│48
Advertisement
Table of Contents
