Extended Parameters - Operating Mode; Extended Parameters - Use Of A Two-Stage Switch-Off - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.5.12 Extended parameters — Operating mode
Options:
– Automatic = automatic switch-on and switch-off.
In the "Automatic" mode, the presence detector switches on automatically when detecting a
movement. The switch-off is effected after the set switch-off delay beginning from the most
recent detection.
– Automatic switch-off = manual switch-on and automatic switch-off.
In "Automatic switch-off" mode, the presence detector must be switched on manually using
the "automatic/manual" object. The switch-off is effected automatically under consideration
of the switch-off delay.
– Light controller (independent of movement) = control dependent on brightness.
In the "Light controller" mode, the presence detector switches on and off only on the basis of
brightness ± hysteresis. Activation / deactivation through the "automatic/manual off" object.
11.5.13 Extended parameters — Use of a two-stage switch-off
Options:
– No: The detector has a switch-off delay and, following the switch-off delay, transmits what
has been set under the "Value for switch-off" parameter.
– Yes: After the switch-off delay the detector first switches to the set reduced brightness and
only then sends the value set under the "Value for switch-off" parameter after brightness
reduced according to switch-off delay.
Example: Switch-off delay = 5 minutes
– Value for switch-off = 0%
– Value for reduced brightness = 20%
– Brightness reduced according to switch-off delay = 3 minutes
If movement is now no longer detected, the light is dimmed to 20% after 5 minutes and then to
0% after a further 3 minutes (switch-off).
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Automatic mode
Automatic switch-off
Light controller (independent of movement)
No
Yes
"Constant light controller" application
│99