Table of Contents
Advertisement
11.8.81 Setpoint settings — Display indicates
Options:
The display can indicate either the absolute or relative setpoint value.
–
Current setpoint: On devices with a display, the setpoint is shown as an absolute
temperature, e.g. 21.0°C.
–
Relative setpoint: On devices with display, the setpoint is indicated as a relative value, e.g. -
5°C to + 5°C.
11.8.82 Setpoint settings — Send current setpoint
Options:
The current setpoint value can be sent to the bus either cyclically and after a change, or only
after a change.
11.8.83 Setpoint settings — Cyclic sending of the current setpoint temperature (min)
Options:
This parameter is used to specify the amount of time that will elapse before the current setpoint
value is automatically transmitted.
Note
This parameter is only available when the "Send current setpoint" is set on "Only
during change".
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Current setpoint
Relative setpoint
Cyclic and during change
Only for change
Setting option between 5 - 240
Application "RTC object"
│147
Advertisement
Table of Contents
