Temperature Reading - Inputs Of Temperature Reading; Temperature Reading - Inputs Of Weighted Temperature Reading; Temperature Reading - Weighting Of Internal Measurement (0 To 100%); Temperature Reading - Weighting Of External Measurement (0 To 100%) - Busch-Jaeger mini KNX 6131/20 series Technical Manual

11.8.93 Temperature reading — Inputs of temperature reading
Options:
The room temperature can be measured at the device or fed to the device by an object via the
bus. In addition, weighted measuring is also available, in which the weighted average of up to
three temperature values (1 x internal, 2 x external) is calculated and used as an input value for
control.
11.8.94 Temperature reading — Inputs of weighted temperature reading
Options:
Specifies the temperature reading inputs for the weighted measurement, in which the calculated
weighted average of the inputs is used as an input value for control.
Note
This parameter is only available when the "Inputs of temperature reading"
parameter is set on "Weighted measurement".
11.8.95 Temperature reading — Weighting of internal measurement (0 to 100%)
Options:
Specifies the weighting of the internal measurement at a level between 0% and 100%.
Note
This parameter is only available when the "Inputs of weighted temperature
reading" parameter is set on "Internal and external measurement" or "Internal
and 2x external measurement".
11.8.96 Temperature reading — Weighting of external measurement (0 to 100%)
Options:
Specifies the weighting of the external measurement at a level between 0% and 100%.
Note
This parameter is only available when the "Inputs of weighted temperature
reading" parameter is set on "Internal and external measurement,""2x external
measurement" or "Internal and 2x external measurement".
KNX Technical Manual 2CKA001473B8667 │ 06.02.2017
Description of application and parameters
Internal measurement
External measurement
Weighted measurement
Internal and external measurement
2 x external measurement
Internal and 2x external measurement
Setting option between 0 - 15
Setting option between 0 - 15
Application "RTC object"
│150