Table of Contents
Advertisement
Pos: 30 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Störungsbeseitigung @ 18\mod_1308568208399_15.docx @ 107037 @ 11 @ 1
7
Fault rectification
Pos: 31 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Störungsbeseitigung/Sonstige Bereiche/Störungsbeseitigung - Rutenbeck USB-HDMI-Kommunikationsadapter @ 22\mod_1332936193055_15.docx @ 206664 @ 21 @ 1
Problem
No signal at the player after the signal
source has been switched on.
No video signal at the player after the
signal source has been switched on.
No audio signal at the player after the
signal source has been switched on.
The player is not recognized.
No data transmission.
=== Ende der Liste für Textmarke Content ===
| 1473-1-7882
Cause
Player has not been switched on.
The plug has come out.
Incorrect installation.
Signal source is not recognized by the
player.
Incorrect installation.
The volume has been set too low at the
signal source or on the player.
The sound on the player is set on mute.
Incorrect installation.
The plug has come out.
Incorrect installation.
The plug has come out.
Incorrect installation.
Fault rectification
Action
Switch the player on.
Check all plug connections for correct
seating.
Check the installation.
Select the signal source manually via the
remote control or via the channel
selection keys of the player.
Check the installation.
Increase the volume.
Deactivate the mute function.
Check the installation.
Check all plug connections for correct
seating.
Check the installation.
Check all plug connections for correct
seating.
Check the installation.
— 9 —
Advertisement
Table of Contents
