Sound And Vibration - NTT docomo Arrows Me F-11D Instruction Manual

◆ Setting Wi-Fi direct
Connect between Wi-Fi direct devices without routing an
access point etc.
･
To use this function, acquire and install an application to
use Wi-Fi direct function from Play Store.
From the Home screen, m→[Settings]
1
→[More...]→Mark/Unmark [Wi-Fi direct]
◆ Stopping packet connection
Some applications automatically perform packet
communications. Packet communication is kept active
unless you cut off the connection or the time-out is
occurred. Activate or deactivate packet communication as
required.
From the Home screen, m→[Settings]
1
→[More...]→[Mobile networks]
2
Unmark [Data enabled]

Sound and Vibration

･
For Public mode (Drive mode), see "Call settings/
Others".→P51
◆ Setting Manner mode
Set/Cancel Manner mode.
･
You can change the Manner mode type.→P64
From the Home screen, m→[Settings]
1
→[Sound and Vibration]→[Manner mode]
2
Mark [Enable manner mode]
Status icons appear on the status bar. Icon varies by
the manner mode type. For each icon, see "Icons on
the status bar".→P32
✔INFORMATION
･
Even in Manner mode, shutter sound, auto focus lock
sound for camera shooting, and count down sound for
self timer are emitted.
❖
Changing manner mode type
From the Home screen, m→[Settings]
1
→[Sound and Vibration]→[Manner mode]
→[Select manner mode]
2
Selecting an item
Manner mode : All sounds do not sound from the
terminal.
Manner mode (Silent) : In addition to mute sounds,
turn off the vibration.
Manner mode (Alarm) : Same operation as Manner
mode except alarm volume and vibration go along
to the alarm settings.
Original manner : Set sound volume and vibration for
each sound type.
64
Settings