Notifying The Other Party Of Your Phone Number - NTT docomo STYLE Series Instruction Manual

The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for
approximately 20 seconds or more, the settings are reset. Also, if
the battery remains empty, the settings may be reset. When this
happens, set again after charging the battery.
If the date and time are not set correctly, the following functions
cannot be used properly.
Redial, Received calls
Alarm
SSL (authentication)
Starting i-appliDX
Machi-chara
Pattern definitions update
Record message (voice), Record message (Videophone calls)
Camera image titles/shooting date
Playback of i-motion or music data with expiration date/period
for replay
View of e-books/e-dictionaries/e-comics with expiration date/
period for browse
When Auto time correction is set to [ON]
When the power is turned on, the FOMA terminal adjusts the time
by connecting to the network's time information.
If the FOMA terminal does not adjust the time even when the
power is turned on, turn off the power and restart.
Time may not be adjusted depending on the signal status.
Time may be off by a few seconds.
When time difference is adjusted overseas, the local time and date
and ! appear in Redial, Received calls, Received/Sent messages
history (SMS only), and Received/Sent messages list. The
received/sent messages are not displayed in order of the
displayed time and date but the mail reception/send.
! does not appear in the Unsent messages for mail messages. If
the date order display is set for the Unsent messages, unsent
messages are displayed in the order of the displayed time and
date.
Auto power ON/OFF
Schedule
i-appli Auto start
Reception, Recording
Software update
Time correction may not be performed depending on the overseas
network.
During overseas use, Japan time and local time (or time set in
City) appear in the dual display except for the following cases.
When Auto time correction is set to [ON] and time correction
information is not being received from an overseas network
When Auto time correction is set to [OFF] and City is set to the
city in the same time zone as Japan
■ Changing time zone manually
1
In the Date settings screen, select the [Auto time
correction] field/t/[OFF]/C.
2
Select a time zone/t.
3
Select a city/t/i.
Notify caller ID
Notifying the other party of your
phone number
Display your number (caller ID) on the other party's phone
(display) when making a voice/Videophone call.
Handset number (caller ID) is important personal information. Be
very careful about your caller ID setting.
The Notify caller ID function is available only on compatible phone
devices.
<City>
45