Error Info Send Set; I-Mode Fault Diagnosis Site - NTT docomo Style F-01E Instruction Manual

✜
Notes
Do not modify FOMA terminal or its accessories.
- Repair may be refused depending on the nature
of modification. The following cases may be
regarded as modifications.
- A sticker etc. is put on the display or keypad
part
- FOMA terminal is embellished with adhesive
material etc.
- Exteriors are replaced with other than
DOCOMO's genuine parts
- Repair of failures or damage caused by
modification is charged even during the
warranty period.
Do not remove any inscription stickers attached to
FOMA terminal.
If confirmation of the inscription sticker's content
is impossible, determination of whether specific
technical standards are satisfied cannot be made.
Therefore, repair may be refused.
Function settings and information may be cleared
(reset) by malfunctions, repair or other handling
of FOMA terminal. Should that happen, set up the
functions again.
If repair is executed, MAC address for Wi-Fi and
Bluetooth address may be changed regardless of
malfunction part.
Magnetic components are used in the earpiece,
speaker, etc. of the FOMA terminal. Do not allow
cash cards or other devices that are vulnerable to
magnetism to come into contact with the phone.
This FOMA terminal is waterproof. However, if
inside of the terminal gets wet or moist, turn the
power off, remove the battery pack immediately,
and bring the terminal to a repair office as soon
as possible. However, repair may not be possible
depending on the condition of FOMA terminal.
80
Support

Error info send set.

Make settings to send error information to
DOCOMO if an error occurs on your terminal.
Information is sent at night. Packet
communication fee is not charged.
Personally identifiable information is not
included.
Some types of errors may not be recorded.
a meh Settingei Other
f Error info send
a ON b OFF
or
Support

i-mode fault diagnosis site

Using your FOMA terminal, you can check
whether sending/receiving of messages and
downloading of images and melodies are
normally performed. When FOMA terminal is
assumed to have malfunctions as the result of the
diagnosis, contact "Repairs" on the last page of
this manual (in Japanese only).
i-mode site : iMenu
(Customer support)
(Inquiries)
(Checking malfunction/radio
wave condition)
(i-mode fault diagnosis
site) (In Japanese only)
The access method may be changed without
previous notice.
Accessing from overseas is charged.
settinge
set.eAuthenticatee
QR code for
site access