Auto Timer - NTT docomo FOMA P906i Instruction Manual

Table of Contents

Advertisement

Information
<Display size>
pWhen "Image size" is set to a size larger than "HVGA Wide (640 x 352)", "Fit in
display" always applies.
pWhen "Image size" is set to "QCIF (176 x 144)" or "Sub-QCIF (128 x 96)", the image is
enlarged two times at both lengthwise and sidewise when it is displayed in "Actual
size".
pThe setting for the Finder display is reflected in the Post View display; however the
setting for the Post View display is not reflected in the Finder display.
<Common replay mode>
pYou cannot operate when you set "File size setting" to "Long time".
File Restriction
You can set the file restrictions for when you save the shot still or moving
image. The operation of attaching to i-mode mail is disabled at the
receiving end who has received the image as the first distribution.
1
Finder displayi(
File restriction
or
Post View display in Photo Mode, Movie Mode or Photo
sending/Detailed display in Continuous
Modei(
)File restriction
2
File unrestricted or File restricted
■For "File unrestricted"
First distribution
Attach to mail
Your FOMA
Destination mobile
phone
phone
164
)Storage setting
Secondary distribution
Attach to mail
■For "File restricted"
First distribution
Attach to mail
Your FOMA
Destination mobile
phone
phone
Information
pEven when you set "File restriction" to "File restricted", the still or moving images can
be output from the destination mobile phone by transmitting the images using infrared
data exchange or by copying them to the microSD card.
pAfter saving, you can use "File restriction" on page 332 to change the settings.
pWhen you set "File size setting" to "Long time" in Movie Mode, "File restriction"
becomes "File unrestricted".

Auto Timer

At Camera start-up
OFF
1
Finder displayi(
Enter a delay time (seconds).
pEnter from "01" through "15", in two digits.
When Auto Timer is set to "ON"
"
" appears on the Finder display.
O
o (
If you press
), a confirmation tone sounds and "
Charging indicator flickers every about 1 second until about 5 seconds before shooting.
From about 5 seconds before shooting, the Call/Charging indicator flickers every about
0.5 second, and the confirmation tone sounds every about 1 second. Shooting takes
place after the set delay time has elapsed.
pTo cancel shooting, press l(
flickering. Even if you cancel shooting, "Auto timer" stays set to "ON".
pYou can shoot immediately by pressing
elapsed.
pWhen you shoot, a confirmation tone sounds regardless of the settings such as
Manner Mode. The sound volume for the confirmation tone cannot be changed.
Secondary distribution
Attach to mail
)Auto timerON or OFF
" blinks. The Call/
) or r while the Call/Charging indicator is
o (
O
) before the delay time has

Advertisement

Table of Contents
loading

Table of Contents