Configuring Ip Interface Khi - Avaya 8800 Troubleshooting Manual

Variable definitions
Variable
<true|false>
all
current-status
asic
rsp-state
rsp-stats
f2x
history
[slot <value>]

Configuring IP interface KHI

Use this procedure to configure IP interface KHI.
IP interface KHI provides the total configured and total operational IP interface count. It also
provides a history of the last 10 IP interface up/down events. As the memory used for IP
interface KHI information is minimal, it has minimal impact on the system.
The IP interface count is calculated when you execute the show command. The KHI uses the
existing IP Interface up/down state transition to keep track of the IP interface operational count
and also to maintain the historical data.
The clear command allows you to establish a reference count and last clear timestamps.
To ensure the validity of the KHI information, ensure that it is in sync with the output from the
IP interface show commands, and verify that the timestamps are relevant.
Procedure steps
1. To enable the IP interface KHI feature, enable KHI globally by entering:
2. To display the IP interface KHI information, enter:
Troubleshooting
Clear command allows to establish the last clear timestamps.
Enables or disables the specified KHI feature.
Displays all forwarding KHI information.
Displays the current status of forwarding by slot.
Displays ASIC health information.
Displays ingress and egress RSP state information.
Displays ingress and egress RSP statistics.
Displays F2X health information.
Displays the event history (maximum of 10).
Displays information for a specific slot.
config sys set khi khi-enable <true|false>
Collecting Key Health Indicator (KHI) information
Value
July 2013 135