Restarting Dante Controller - Extron electronics DMP 128 Plus User Manual

Be certain the correct LAN connection is selected (the PC LAN port that is physically
connected to the AT network) and note the IP address.
Figure 192.
2. If it is on, turn off the PC wireless adapter. Disable all connections except the LAN
port connected to the Dante network (verify this is the correct port by checking the IP
address shown in the
3. Turn off all anti-virus and firewall software on the computer.
4. Enable DHCP on the remaining network connection. This forces the computer to
acquire an IP address from the Dante interface.
NOTE: A DHCP server must be on the network for DHCP to function correctly.

Restarting Dante Controller

If subscriptions or normal operation cannot be restored, restart Dante Controller software.
To access the Dante Controller Help file, do any of the following:
Click the
•
figure 193,
• Select
• Press the
help.
Figure 193.
Configure Dante Interfaces Dialog Box
Configure Dante Interfaces
icon in the upper-right corner of the
Help
below).
1
, then or
Help Online Help
key on the computer keyboard for online help or
<F1>
Accessing the Dante Help File
dialog).
Network View
from the menu (
Offline Help
DMP 128 Plus • Dante Controller
screen (see
).
2
for offline
<Shift+F1>
122