Mix-Point Context Menu; Dsp Configurator Outputs - Extron electronics DMP 128 Plus User Manual

Mix-Point Context Menu

Right-click a mix-point to open the mix-point context menu. This menu provides quick
options to operate mix-points.
Figure 94.
1
2
3
4
5
6
7
8
9
¢

DSP Configurator Outputs

The outputs run along the top right of the main workspace in DSP Configurator. There are
three types of outputs available:
•
•
•
These outputs receive signal when mix-point connections are made between an input and
an output in the mix-matrices.
Each output panel can be expanded or collapsed by clicking the
buttons.
Mix-Point Context Menu
Mute — Mutes the mix-point.
Unmute — Unmutes the mix-point and creates an audio path between an input and
output.
Include Automixing — Includes automix processing at the mix-point and marks the
mix-dot orange to signify automixing is included.
Bypass Processing — Bypasses signal processing, except for filters, at the mix-point
and marks the mix-dot green to signify signal processing is bypassed.
Cut — Cuts the mix-point parameter configuration, preparing it to be pasted to another
mix-point. The parameter configuration information is not removed until it is pasted to
another mix-point.
Copy — Copies the mix-point parameter configuration, leaving the mix-point intact and
preparing it to be pasted to another mix-point.
Paste — Pastes a previously cut or copied mix-point parameter configuration to the
selected mix-point.
Delete — Deletes the mix-point parameter configuration and mutes the mix-point.
Mark Row — Marks the entire row containing the selected mix-point, highlighting all of
the elements.
Unmark Row — Unmarks the entire row containing the selected mix-point.
Outputs on the next page
Aux Outputs on page 62
Expansion Outputs on page 64
(expand) or
DMP 128 Plus • DSP Configurator Software
(collapse)
57