Aux Output Processing; Aux Output Trim Block; Aux Output Filter Block; Aux Output Dynamics Block - Extron electronics DMP 128 Plus User Manual

Aux Output Processing

The Aux output processing chain in DSP Configurator is represented by a string of blocks
(see figure 111 below). Each block contains a specific processor or type of processor. Each
Aux output contains the following processor chain:
1.
2.
3.
4.
Figure 111.

Aux Output Trim Block

One trim block is available for each Aux output channel. This trim block functions the same
as the output trim block (see
configuring the Aux output trim block).

Aux Output Filter Block

One filter block is available for each output channel. This filter block functions the same
as the mic/line input filter block (see
configuring the Aux output filter block).

Aux Output Dynamics Block

One dynamics block is available for each output channel. This block functions the same
as the mic/line input dynamics block (see
information on configuring the Aux output dynamics block).

Aux Output Gain Block

Double-click the Aux output gain block to access a drop-down menu that displays USB
and VoIP (V models only) output options. A selection must be made before audio passes
through an Aux output.
Figure 112.
The
Input Gain Block
NOTES:
Aux Output Trim Block
Aux Output Filter Block
Aux Output Dynamics Block
Aux Output Gain Block
Aux Output Processing Chain
Output Trim Block
Aux Output Gain Block and Drop-Down Menu
and selections in the Aux output mimic that of the Aux input (see
USB... VoIP...
on page 44).
• It is recommended that the
communication audio and
• When a VoIP line is assigned as the source for an Aux input, the same VoIP line is
assigned to the corresponding Aux output. For example, if VoIP Line 1 is assigned
to Aux input 1, VoIP line 1 is automatically assigned to Aux output 1 as well. Aux
outputs can be reassigned to a different VoIP line.
on page 60 for more information on
Input Filter Block on page 26 for information on
Input Dynamics Blocks
left and right channels be used for
USB 1
left and right channels be used for line input.
USB 2
DMP 128 Plus • DSP Configurator Software
on page 32 for
Aux
63