Extron electronics DMP 128 Plus User Manual page 120

x
6. Click the
Device Config
page.
7.
In the
Rename Device
spaces are allowed in the name. Names should be significant identifiers. For example,
enter
DMP128Plus-MainRack
8. Click ( ). A confirmation prompt opens.
Apply 3
Figure 179. Device Config Dialog, Rename Device
9. Click ( ) to confirm the new name, then close the
Yes 4
box. The new name is written to the Dante interface of the DMP 128 Plus AT. Repeat as
necessary for all devices.
NOTE: The device name assigned in Dante Controller only applies to the Dante
interface and does not affect the device name recognized in DSP Configurator.
Figure 180. Rename Device Confirmation Dialog Box
tab (see figure 179, below) to open the
1
panel, enter the new name of the device in the text field. No
( ).
2
DMP 128 Plus • Dante Controller
Device Config
dialog
Device Configuration
112