Placing A Call With The Phone Dialer; Receiving A Call With The Phone Dialer - Extron electronics DMP 128 Plus User Manual

Placing a Call with the Phone Dialer

NOTE: VoIP lines must be registered with the call server via the DMP 128 Plus VoIP Web
page (see
input and output (see
1. Select
2. Select a line using the
3. Click
New Call
4. Enter the desired number or extension using the keypad (
number field (
5. Click the green "off hook" button on the keypad (
6. The appearance window (
7. Click
Hold
8.
Click the red "on hook" button to end the call.

Receiving a Call with the Phone Dialer

NOTE: VoIP lines must be registered with the call server via the DMP 128 Plus VoIP Web
page (see
input and output (see
1. Select
2.
When a call is incoming, the corresponding
3. Click the
4. Highlight the appearance the call is on.
5. Click the green "off hook" button on the keypad.
6. Click the red "on hook" button to end the call.
DMP 128 Plus VoIP Web Page
Aux Inputs
. The
Tools>Phone Dialer
buttons (see
Line
( ).
4
) and type the desired number or extension using the keyboard.
6
) displays the status of the call.
2
to place the call on hold. Click
DMP 128 Plus VoIP Web Page
Aux Inputs
. The
Tools>Phone Dialer
button with the incoming call.
Line
on page 167) and assigned to an Aux
on page 43).
dialog opens.
Phone Dialer
figure 163, on the previous page).
3
). Alternatively, click the
7
).
7
again to return to the call.
Hold
on page 167) and assigned to an Aux
on page 43).
dialog opens.
Phone Dialer
button flashes red.
Line
DMP 128 Plus • Configuration Tools 97